daltile 1020 TS Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} daltile 1020 TS. daltile 1020 TS 16 pages. Tile

Imprimer la page

MACHINE SPECIFICATIONS

Saw Spindle

Cutting Table

Detachable Legs

This Daltool Tile Saw is designed and intended

for the professional contractor. The machine is

equipped with a height adjustable cutting head.

The movable sawing table has 4 ball bearing

guide rollers for precise and smooth cutting

feed. Through continuous supply of cooling

water, the cutting quality is improved and the

wear on the saw blade is minimized. The coo-

ling water also absorbs the saw dust. The quali-

ty and construction of this tile saw meet the hig-

hest standards. The design is based on longevi-

ty and minimal maintenance.

The stainless steel construction contributes to a

stable, rigid and durable sawing machine. The

4 detachable legs are to be installed in the leg

sockets at the underside of the water container

and fastened with the knob.

Blade Guard

Water Pump

Cutting Head

The cutting head is constructed of welded steel

components.

Blade Guard

The Blade Guard is a welded steel plate cap,

simple to remove and install for changing the

saw blade by unscrewing 2 knobs.

Saw spindle

The spindle flange is mounted on the saw spind-

le. The saw flange is to be mounted on the saw

spindle with a hexagon nut to clamp the saw

blade.

Cutting table

The cutting table is constructed of welded stain-

less steel components, equipped with anti-slip

rubber and adjustable side stop. The saw table

is equipped with 4 ball bearing guide rollers for

precise and smooth cutting feed.

Cooling system

The electrical water pump is switched on simul-

taneously with the saw motor and supplies coo-

ling water to both sides of the saw blade. A

drain hole, with a plug, is located in the water

container. Mud flaps prevent most of the water

mist and make sure most water flows back in

the water container.

Technical Data:

Type...............................................daltile 1020 TS

Capacity.........................................................2 HP

Blade diameter/Arbor ........................10" / 5/8"

Cutting height ......................................max. 3 1/8"

Saw spindle speed .............................3.360 RPM

Cutting length...................................................20"

Cutting table dim.....................18 5/8" x 15 3/4"

Length...............................................................42"

Width.......................................................... 23 5/8"

Height (without legs) ................................ 24 1/2"

Weight ........................................................176 lbs

Noise level............................................. 89 dB (A)

Noise level during sawing ................... 98 dB (A)

DALTILE 1020TS OPERATING MANUAL V02/2004R1 PAGE 11