Dam Easy Flood Barriers DME01 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dam Easy Flood Barriers DME01. Dam Easy Flood Barriers DME01 13 pages.

Imprimer la page

SECTION C: Installing the barrier(s)

STEP 2A: EXTENDING THE SIDE PANELS – SINGLE BARRIER

CAUTION: WEAR GLOVES TO PREVENT INJURY AT PINCH POINTS

2A.2 Position the Direction Switch

2A.1. Hold Barrier firmly

outwards on Ratchet Handle

in position, pressing

(towards user)

down at Lifting Point

CAUTION

ONLY LIFT FROM HERE WHEN MOVING

2.0

PRESS DOWN HERE WHEN INSTALLING

1.0

3.0

4.0

NEVER LIFT USING PUMP HANDLE

780mm –1100mm

2A.4 Barrier is secure when

2A.5 'Max' extension is marked

resistance is felt on the

Ratchet Handle, check

that no movement of

the Barrier is possible

within the reveals. Return

the Ratchet Handle to the

verticle position

CAUTION/

The barrier must be secure at this point, to create watertight seal

IMPORTANT

780mm –1100mm

2A.3 Jack the Ratchet Handle

to extend the Side Panels,

continue until the Barrier is

secure within reveals

NOTE: You must push down

firmly on the barrier to ensure

it is tight to the ground.

bar

2A.6 Check that the

at the top of each side

door closes without

panel. If the barrier is not

interference.

secure at this point, see

If there is interference,

Section H Troubleshooting

see Section H

Troubleshooting

CONTINUE TO STEP 3,

INFLATE THE SEAL

bar

780mm –1100mm

STEP 1B: POSITION EXTENSION POLE AND MULTIPLE BARRIERS

The Dam Easy

beyond 1.7m/67in wide. The installation Dam Easy

BASE SOCKET INSTALLATION – A one-off installation to secure the base socket into the ground (concrete).

Please note Base Socket installation will need to be carried out prior to proceeding with installation of

multiple barriers.

POLE INSTALLATION – A quick and simple instalation to fix the Extension Pole into the base socket.

1B.1 Clear any dirt or debris from the doorstep and

reveals. For an enhanced seal, double over

filler to create a thick strip and place at each

corner of the doorstep/reveals, in line with

bar

the barrier position. Filler is not needed at

the extension pole (due to the inbuilt

chamfer seals)

1B.2 Wearing gloves, remove the barriers one at a

time from the reusable packaging. Hold the

Barrier firmly in place at the Lifting handles

bar

until securely positioned

bar

SECTION C: Installing the barrier(s)

780mm –1100mm

30.7in – 43.3in

Extension Pole allows the use of multiple Dam Easy

Extension Pole is undertaken in 2

1100mm –3300mm

43.3in – 129.9in

780mm –1100mm

30.7in – 43.3in

1B.2 Remove the lid of the base socket and insert all

1100mm –3300mm

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

bar

1B.3 Position the barriers vertically, between the

1100mm –3300mm

43.3in – 129.9in

CAUTION/

Help from another person may be needed to lift safely,

IMPORTANT

lift only at the Lifting Handles marked

780mm –1100mm

30.7in – 43.3in

Flood Barriers covering openings

stages:

1100mm –3300mm

43.3in – 129.9in

780mm –1100mm

30.7in – 43.3in

extension pole(s) into the fixed base(s). Ensure

extension pole is at right angles to the ground.

Slot into ground and twist/screw into position

1100mm –3300mm

43.3in – 129.9in

to create a watertight seal

1100mm –3300mm

43.3in – 129.9in

1100mm –3300mm

reveal and extension pole or between 2

43.3in – 129.9in

extension poles as relevant (Ratchet Handle

facing inwards).