Conair 10 piece HC90JCC Instructions pour l'entretien et l'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions pour l'entretien et l'utilisation pour {nom_de_la_catégorie} Conair 10 piece HC90JCC. Conair 10 piece HC90JCC 8 pages.

Imprimer la page

SPECIAL OIL

To maintain the blades of your Conair

clipper, oil them after every three or four hair-

cuts. Gently place a few drops of oil on the teeth

of the blades, using the special Conair

cluded with your set. Turn the clipper on for a

minute, then turn off. This light, natural oil was

formulated specifically for the Conair

speed clipper. Because it is the right oil to use,

it will not slow down the blades. Never use any

other product. There is no substitute for Conair

oil. Keep oil out of the reach of children.

POWER SCREW

The power screw permits you to adjust power

to your clipper. You may need to make this ad-

justment if the power in your house is low. (The

oil in-

Conair

use.)

1. With a screwdriver or a dime, turn the

high-

power screw

arm strikes the coil, making a clacking noise.

(FIG. 1)

2. Then turn the screw clockwise, just

until the noise stops and then turn about

45 degrees. This is the maximum power

setting. (FIG. 2)

clipper was designed for household

counter clockwise until the

Fig 1

Fig 2