Abstract Instruments AVALON Manuel de démarrage rapide - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Abstract Instruments AVALON. Abstract Instruments AVALON 19 pages. Analog bassline synthesizer

Imprimer la page
For example, to make steps 1-4 one long note (this would be a quarter-note at the default 1x scale) you
would press STEP BUTTON 1 + STEP BUTTON 4. Steps that are tied are easily seen as the indicators will
be half-brightness.
Steps that don't have a note or tie programmed are RESTS and are indicated by unlit STEP BUTTON LED's.

4.7.2.3 ACTIVE STEPS

Steps in a pattern can be skipped by pressing
[TIME]
+
[ACTIVE]
you can easily see which steps are inactive in a pattern section, as steps that are not
active are not lit. De-activating steps will inherently change the pattern length.
For example, to set step 16 as an active step hold
lit.

4.7.3 PITCH ATTRIBUTES

There are several pitch-related parameters for each pattern step. These include the following:
1) Pitch
2) Accent & Slide
3) Transpose
4) Modulation Envelope Triggers
These attributes can all be set while the sequencer is running. Assuming you are starting with a cleared
pattern, you can start entering pitch attributes as described in the following subsections.
* These pitch attributes won't be covered in this quick start manual, see the reference manual for details.
4.7.3.1 PITCH
To enter a pitch, press and hold a step button and select a key on the chromatic keyboard. For example, to
enter a "C#" on step 1 press STEP BUTTON 1 + [BUTTON KEY C#]. The C# indicator will remain lit while
the step button is held to indicate C# has been programmed.
12
[TIME]
+
[ACTIVE]
+ STEP BUTTON. While holding down
[TIME]
+
[ACTIVE]
5) Slide Time*
6) Filter CV Offset*
7) Gate Length*
and press STEP BUTTON 16 until it is
Avalon - Quick Start Manual