Conair 094XBRC Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Conair 094XBRC. Conair 094XBRC 8 pages. Ceramic ionic styler

USER

MAINTENANCE

Your dryer is virtually maintenance free.

No lubrication is needed. For proper op-

erating performance, the dryer must be

kept clean. When cleaning is needed, un-

plug the cord, and clean dust and lint from

air intake openings with a small brush or

the brush attachment of a vacuum cleaner.

The outer surface of the dryer should be

wiped clean with a damp cloth only.

Blocked or clogged air intake vents will

cause the dryer to overheat. If overheat-

ing occurs, an automatic safety device will

shut the dryer or the heat off to prevent

damage or personal injury. If the unit or

the heat cycles off, unplug the cord and al-

low the dryer to cool for 10 to 15 minutes

before restarting. Make sure the air vents

are clean.

CAUTION

NEVER allow the power supply cord to be

pulled, twisted, or severely bent. Never

wrap the cord tightly around the dryer.

Damage will occur at the high flex point of

entry into the dryer, causing it to rupture

and short. Inspect the cord frequently for

damage. Stop use immediately if dam-

age is visible or unit stops or operates

intermittently.

If the cord or dryer is damaged or does not

operate properly, return it for repair to an

authorized Conair service representative

only. No repairs should be attempted by

the consumer.

STORAGE - Important

When not in use, your dryer should be

disconnected and stored in a safe, dry

location, out of reach of children. Do not

wrap line cord around dryer. Allow the

cord to hang or lie loose and straight at

the point of entry into the dryer.