Dametric GIR-DM1 Description - Page 5
Parcourez en ligne ou téléchargez le pdf Description pour {nom_de_la_catégorie} Dametric GIR-DM1. Dametric GIR-DM1 7 pages. Gms industrial 4g router
Imprimer la page
Dametric AB
3.2 Function of the control elements
Description
Reset key
SIM card slot
Table 3: Description of the functions and meaning of the control elements.
4
Connections
4.1 Front panel connections
Figure 2: Connections on the front panel of the device
Position
Description
1
Ethernet port LAN 1 (RJ45, 10/100 BT)
Connect this port to the GMS-SW1 unit.
2
Ethernet port LAN 2 (RJ45, 10/100 BT)
This port is normally not used.
3
Cellular antenna connection (SMA socket), main antenna.
Connect the GIR antenna to this socket.
4
Cellular antenna connection (SMA socket), additional antenna for 2x2 MIMO
(downlink). Normally not used.
Table 7: Description of the connections on the front panel of the device
The screen of the antenna system must be connected to the protective conductor when using an outside
mounted antenna.
GIR-DM1 EN.docx
GIR-DM1
Operation
Press once for a short time.
Press at least 3 seconds.
Press three times for a short time
within 2 seconds.
Press on SIM card for a short
time
Meaning
Resets the software and restarts it.
(Soft reset)
Resets the hardware and restarts
it. (Hard reset)
Deletes all settings and resets the
device to the factory defaults.
Ejects the SIM card.
Use this socket for the GIR Antenna
Ethernet cable to the switch
Sept. 14, 2015 / BL
GMS Industrial Router
Page 5 of 7