3onedata 7210-1U Manuel d'installation rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} 3onedata 7210-1U. 3onedata 7210-1U 3 pages. Ethernet/4e1 protocol converter
Imprimer la page
Pin NO.
1
2
3
4
Definition
NC RX+ RX- TX+ GND GND TX- NC
【LED Indicator】
The device provides LED indicators for monitoring device's
operating
status,
which
has
troubleshooting process. The function of each LED is
described in the table as below:
LED
Status
Description
ON
PWR is connected and running
normally
PWR
OFF
PWR is disconnected and
running abnormally.
ON
Ethernet port is connected.
LINK
OFF
Ethernet port is disconnected.
ON
Ethernet port is in full duplex
mode.
DUP
OFF
Ethernet port is in half duplex
mode.
ON
Ethernet port rate is 10Mbps
10M/ACT
Blinking
Data is being transmitted through
Ethernet port.
ON
Ethernet port rate is 100Mbps
100M/ACT
Blinking
Data is being transmitted through
Ethernet port.
ON
(1-4) E1 port is running normally
(1-4)
OFF
(1-4) E1 port is running
E1-WORK
abnormally
ON
(1-4) E1 port signal interruption
(1-4)
alarm
E1-LOS
OFF
(1-4)
E1
connected
ON
Pseudorandom
succeeded
PTOK
OFF
Loopback test is operating or off.
ON
E1 port is in loopback test status
TEST
OFF
No E1 port is in loopback test
status
【Specification】
5
6
7
8
Panel
Ethernet port
simplified
the
overall
E1 port
Indicator
Power supply
Input power supply
Connection terminal
Power consumption
Full-load
Operating temperature
Operating temperature
Storage temperature
Operating humidity
port
is
normally
loopback
test
1-way 10/100M, full/half
duplex can configure RJ45
port
4-way E1, optional 75Ω BNC
port or 120Ω RJ45 port
(rack-mounted)
Power indicator, Ethernet
indicator, E1 indicator,
loopback test status indicator
220VAC (desktop)
Optional 220VAC or -48VDC
(rack-mounted)
220VAC: 3-hole socket
-48VDC: 3-pin terminal
blocks.
≤2W
-25~70℃
-40~85℃
5%~95%(no condensation)