dams DHBC Manuel - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} dams DHBC. dams DHBC 10 pages.
Imprimer la page
DOOR ADJUSMENT AND ALIGNMENT
A
TO ADJUST THE GAP BETWEEN DOORS
Apply equal adjustment to point A on all hinges.
Tighten to make the gap smaller.
Loosen to make the gap larger.
TO ADJUST THE GAP BETWEEN DOOR AND TOP
Loosen all point B screws without removing them.
Once loose lift the door to close any gap.
Whilst the door is held in its preferred position
re tighten all point B screws again.
TO COMPLETELY REMOVE DOORS ACTIVATE BUTTON D ON ALL HINGES
6
B
A
C
B
C
D
D
B
POWER TOOLS SHOULD NEVER BE USED FOR ANY ADJUSTMENTS
-
SIDE ADJUSTMENT
-
HEIGHT ADJUSTMENT
-
DEPTH ADJUSTMENT
-
DOOR RELEASE BUTTON
TO RE ALIGN SKEWED DOORS
Adjust point A on individual hinges to re align accordingly.
Tightening the top hinges will rotate the door clockwise.
Tightening the bottom hinges will rotate the door anti-clockwise.
TO ADJUST THE GAP BETWEEN DOOR AND SIDE PANEL
Loosen point C screws on all hinges.
Slide the hinge to your preferred position
and re tighten point C screws.