Conairphone CID200 Manuel du propriétaire - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Conairphone CID200. Conairphone CID200 7 pages. Caller id speakerphone with 10 memory dialing

Imprimer la page

NOTE: If no key is pressed within 20

seconds, the LCD will show the

'Answer-Ready' mode, and display

the total call counter, new call counter,

current time and date.

VIEW THE CALLER ID MEMORY

If you have new calls ('NEW' icon and New Call LED is lit). Press

[ ] or [ ] to read all of the most recent calls. The NEW CALL#

will decrease.

Once all the new calls have been

read, 'END OF NEW CALL' will be

displayed.

Press [ ] to view the oldest calls, or press [ ] to view the most

recent calls.

NOTE: After you view all the call in

memory, the LCD will show 'END OF

LIST'.

NOTES:

1. The New Call LED will blink until all the new Caller ID data

has been reviewed.

2. If the 'RPT' icon is turned on, you have received multiple NEW

calls from the same number.

3. If you receive a call from a number stored in (previously

reviewed) memory, the data in memory will be replaced with

the new call's time and date and the 'NEW' icon will be turned

on.

If no key is pressed within 20 seconds, the LCD will show the

'Answer-Ready' mode, and display the total call counter, new

call counter, current time and date.

ERASING THE CALLER ID

INFORMATION

• Press [ ] or [ ] for the Caller ID memory location to be

reviewed.

• To clear a single Caller ID memory location, press [ERASE]

twice quickly.

• The data for that call will be erased, and the CALL# and Caller

ID information will be updated.

• After all new message being reviewed, press and hold

[ERASE] for 3 seconds. The message 'ERASE ALL CALLS'

will appear to confirm your action. Press [ERASE] to clear all

the information, then the message 'NO CALLS' appear.

• Both the total call and new call counters will become zero,

and the current time and date will be displayed.

CALL BACK (REDIAL) FROM THE

CALLER ID MEMORY

Option 1

1. With the handset hung up on the base press [ ] or [ ] to find

the Caller ID memory location to be redialed.

2. Press [CALL BACK] twice to redial, the LCD shows 'LIFT

HANDSET' or 'PICK UP CALL'.

Option 2

1. Pick up the handset to make your phone call.

2. Press [ ] or [ ] to find the Caller ID memory location to be

redialed. Press [CALL BACK] twice, the number will then be

dialed automatically.

WHEN THE CALLER'S PHONE

NUMBER HAS A DIFFERENT AREA

CODE FROM THE PRESET:

The long distance dialing digit '1' will be inserted automatically

during Caller ID memory call back.

Press [CALL BACK], 11 digits number will blink. Press [CALL

BACK] again to confirm to dial the 11 digits number.

WHEN THE CALLER'S PHONE

NUMBER HAS THE SAME AREA CODE

AS THE PRESET:

The long distance dialing digit '1' and the 3 digits area code will

be deleted automatically during Caller ID memory call back.

Press [CALL BACK], 7 digits number will blink. Press [CALL

BACK] again to confirm to dial the 7 digits number.

NOTE: Your telephone company may require a different format

for making out-of-area (toll) calls WITHIN your area code. See

the next section for the procedure to obtain the applicable toll-

call format for your phone company.

WHEN YOUR TELEPHONE COMPANY REQUIRES YOU TO

DIAL OTHER THAN A 7-DIGIT NUMBER (SAME AREA

CODE) OR 11-DIGIT NUMBER (DIFFERENT AREA CODE)

TO MAKE TOLL CALLS WITHIN YOUR AREA CODE,

FOLLOW ONE OF THE 4 OPTIONS BELOW FOR CALLER

ID CALL BACK.

Option 1

1+Area Code+7-Digit Number (11 digits)

Option 2

1+7-Digit Number (8 digits)

Option 3

Area Code+7-Digit Number (10 digits)

Option 4

7-Digit Number Only.

Follow the procedure below to select one of the above

options for Caller ID call back.

With the handset hung up on the base.

1 Press [ ] or [ ] to find the Caller ID memory location to

redialed. Press [CALL BACK], the 7-digit number (if same

area code) or 11-digit number (if different area code) will blink.

2. Press [ ] or [ ] to select one of the options.

3. Press [CALL BACK] again to confirm the dial.

PRIORITY CALL

The CID200 has a special Priority Call feature that works with

the incoming Caller ID.

You can set up to a maximum of 10 phone numbers for the

Priority Call feature. When the incoming phone number on Caller

ID matches with one of the preset Priority Call numbers, 3 beep

tones will be heard each time the phone rings. This will alert you

that the call is from a priority caller, and the PRIORITY icon will

display on the LCD with the Caller ID data.