DAN NTP TECHNOLOGY DAD THUNDER CORE AX64 Manuel d'installation - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DAN NTP TECHNOLOGY DAD THUNDER CORE AX64. DAN NTP TECHNOLOGY DAD THUNDER CORE AX64 19 pages. Thunderbolt 3, dante, madi and adat modular audio interface
Imprimer la pageLatency
Channels and Sample rates per link
Electrical Specifications:
Power consumption
Input voltage
Mains fuse, mounted in IEC connector
Safety compliance
Power supply cord must be min. light sheathed flexible cord according to IEC60227 (designation 60227 IEC 52)
and include a protective earth conductor having a green-and-yellow insulation. Cross-sectional areas min.
3x0.75mm2"
Mains line plug type
110-125V
220-230V
240V
Mechanical specifications
Chassis standard
Chassis depth, without connectors mounted
Chassis body width
Weight
Doc no. AX64-8001-A-4
Below 1 microsecond latency between interconnected
units.
The overall latency is defined by the system delay set for
all the units which is normally 7 samples. All I/O
connections across units are 100% aligned in phase.
128 channels
64 channels
32 channels
16 channels
Double channel count by using two fibre links.
Digital section 15W
DAD I/O Options max 75W
Thunderbolt power max 2x15W
Mains 120 VA max.
90 – 260 VAC
100 – 240 VAC Nominal, 47 - 63 Hz
1.5 A, T1.5AH/250V
IEC 62368-1:2020+A11 2020
Correct type acc. to standard
UL817 and CSA C22.2 no 42
CEE 7 page VII, SR section 107-2-D1/IEC 83 page
C4.
BS 1363 of 1984.Specification for 13A fused
plugs and switched and unswitched socket
outlets
19", 2 RU
34.5 cm / 14.0"
43.5 cm / 17.2"
5.6 kg / 12.3 lbs.
Rev. date 221023
@44.1 and 48 kHz
@88.2 and 96 kHz
@176.4 and 192 kHz
@352.8 and 384 kHz
Page 18 of 19