Dan D'Agostino Relentless Mono Amplifier Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dan D'Agostino Relentless Mono Amplifier. Dan D'Agostino Relentless Mono Amplifier 9 pages. Monoblock

Imprimer la page

AC cord

The Relentless amplifier is fitted with threaded terminals for its power connections, rather than the

IEC connector found on almost all other power amplifiers. Your amplifier has been shipped with

the appropriate power cord for the voltage and socket available in your region/country. We strongly

recommend you have a licensed electrician connect your power cable, to ensure the connections are

correct. Incorrect power connections will void your warranty and can damage your amplifier.

To connect the power cable, remove the two screws on the plastic cover that protects the AC cable

terminal connections. Remove the nut on the amp's positive terminal, place the spade ring of the

positive (+) conductor of the cable over the terminal, then replace the nut. Tighten the nut firmly but

gently with a 3/4-inch socket wrench. Use of excessive force on the socket wrench could damage the

terminal. Repeat the process for the negative (-) and ground conductors, then replace the plastic cover

and tighten the two screws down to secure it.