ADDER AdderLink LPV154T Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ADDER AdderLink LPV154T. ADDER AdderLink LPV154T 18 pages. Signage video extender

Imprimer la page

To connect the link cables

The links between the transmitter and receiver modules are made using

between one and four twisted pair cables, specified to Category 5 or higher.

Each cable carries video signals and power to each receiver module.

LPV154

CATx LINKS UP TO 150m (492 feet)

1 Attach the connector of the first link cable (no longer than 150m, 492 feet)

to the socket labelled

on the transmitter. There should be a click when

LINK1

the cable is fully inserted and locked in place.

2 Attach the connectors of the remaining link cables (no longer than 150m,

492 feet each) to the sockets labelled

IMPORTANT: The signals and power connections sent through the link

cables are NOT compatible with standard networking equipment

and could cause damage if connected. Do not connect the

transmitter or receiver modules to any other devices.

LPV150R

, as required.

LINK2

LINK4

Link

cables to

the receiver

modules

Note: All of the link ports are independent. The receiver modules may be

connected, disconnected or swapped around in any order without affecting the

operation of other modules.