Concept Housewares PREMIER PR-40322 Manuel d'assemblage - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} Concept Housewares PREMIER PR-40322. Concept Housewares PREMIER PR-40322 2 pages. Wall mounted wood pot racks

Imprimer la page

Mounting Directions:

Undo the front facing screw on each bracket, (photo, E) insert flat bar

and replace screws. Note it may be necessary to use the flat head

screwdriver to hold back of screws while the Phillips screwdriver is

used on the front to tighten or loosen. Then with rough frame work

constructed use as a guide for installation. Measure carefully where

you want to mount the rack on the wall use a pencil to mark where

the screws attach to the wall.

Remove the unit and drill holes using a 5/16" drill bit. When possible

mount to a wall stud. Supplied anchors have a pull rating of 20 lbs. or

more each and a shear rating of 50 lbs. each.

Insert the anchors into the drilled holes. They may need to be tapped

in gently with a hammer. Use the supplied key to expand the anchor

behind drywall. (See Photos F to J on next page for proper and

improper anchor install). Use supplied screws to attach.

Photo F - Drill 5/16" diameter

(8mm) hole. Fold anchor in middle.

Photo H - Insert key to pop anchor

open & lock behind hollow wall

(not necessary for thick or solid

walls). Do not force of hammer key.

Wall Mounted Wood Pot Racks Models

PR-40322, PR-40326 and PR-49332

Photo G - Insert anchor in hole

and tap flush with wall.

Photo I - Place item over anchor. Insert screw and

tighten untill screw is flush with fixture. Then, stop.

The anchors also wedge securely in thick or solid

walls, or in wood studs behind drywall.

Premier Pot Racks

www.premierpotracks.com | Email: [email protected]

Page 2

Photo E - Front facing screw

Photo J - correct (top) and

incorrect (bottom).