2Boom HPBT100 Pour commencer

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} 2Boom HPBT100. 2Boom HPBT100 2 pages. Mobile bluetooth headset

Imprimer la page

Power Switch

Next/ Volume +

Mic

Line in

Previous/

Volume-

Play/Pause/

Phone/Mode

The

HPBT100

is powered by a rechargeble battery inside the headset. When the blue power light dims, or if you satrt to

notice sound distortion at higher volume, it's time to recharge the battery. Connect the mini USB plug to the speaker

and larger USB plug to a powered USB port, such as that a computer, or the optional AC adapter. The light on the speaker

will turn red whilst charging and blue when fully charged.

Note:

1. You can continue to listen to the headset whilst it is charging.

2. If the battery level is too low, the Bluetooth connection may not operate correctly.

1. Place the unit on a level surface away from sources of direct or excessive heat.

2. Clean your unit with a soft cloth moistened only with mild soap and water.

3. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit.

Rechargeable Li-poly battery

This device uses an internal rechargeable Li-poly battery that should last the lifetime of the device. if you suspect your battery

may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information.

Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace your battery,

you should follow the disposal instructions below.

WARNING/DISPOSAL OF UNIT

Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.

Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the

disposal of batteries/electronics, If there are no local regulations concerning battery/electronics disposal, please dispose

of the device in a waste bin for electronic devices.

Many electronics retailers now recycle batteries and other electronic components at no charge.

Check to see which ones in your area do so.

LED Indicator

USB Jack Input

To USB Power

Charge Battery

SD Input

Note: When not in use,

turn power off to conserve the battery.

Charging the HPBT100

Maintenance

Getting started with

HPBT100

Mobile Bluetooth headset

Rechargeable Li-poly battery

Caution: The battery used in this device may present a risk of fire, explosion or

chemical burn if mistreated

* Unit shall not be exposed to excessive heat such as sunshine, fire, or the like,

* Do not use or charge the battery if it apperars to be leaking, discolored, deformed, or in anyway abonormal.

* Do not leave your battery discharged or unused for extended periods of time. When batteries are misused, the may

explode or leak, causing burns and personal injury . If your battery leaks, use normal precaution and discard the

unit immediately.

Using the HPBT100

HPBT100

Thank you for purchasing the

headset . This unit is designed to provide years of trouble-free audio performance.

Please read these instructions carefully for proper operation and save for future refernce.

Connecting with Bluetooth

To play audio from a Bluetooth device, you need to pair the device with the headset . You can pair up to eight devices.

1. On your Bluetooth device, switch on Bluetooth and scan for devices in its Bluetooth menu.

2. Turn on the headset. When powering up for the first time, the headset is discoverable for 2 minutes and is ready for pairing.

The status indicator flashes blue.

3. When "

2Boom

" appears on the device list of your Bluetooth device, select it to initiate pairing. (If a pass code is requested,

enter 0000). The Bluetooth status light turns solid blue after pairing is established. The speaker is ready to play music.

Note: If pairing fails, switch the headset off and then back on so that the Bluetooth status light

flashes blue again. Repeat step 3.

Connect micro SD card

1. Connect the or micro SD card to the headset.

2. Slide the power switch of the headset to the ON position. The blue power light will illuminate.

3. Hold the "_" to decrease the volume, press"_" to go previous song.

4. Hold the "+" to increase the volume, press"+" to go next song.

HPBT100

5. When you are finished listening,turn the

OFF to conserve the battery.

Connect an audio device via its Line-in socket

1. Connect the stereo 3.5mm audio cable to the headphone jacker

line - out of any audio device, then connect the 3.5mm stereo plug on the other end to the connector

on the HPBT100 headset.

2. Slide the power switch of the headset to the ON position .

3. Press play on your audio device and adjust its volume to listen to audio.

4. Hold the "-" to decrease the volume, hold the "+" to increase the volume

HPBT100

5. When you are fished listening, turn the

headset OFF to conserve the battery.

HPBT100

Model: