Abt KOSE507EWH Manuel d'instructions d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Abt KOSE507EWH. Abt KOSE507EWH 20 pages. 27" (68.6 cm) and 30" (76.2 cm) electric single and double built-in oven flush installation kit
Également pour Abt KOSE507EWH : Manuel d'instructions d'installation (20 pages)

Imprimer la page

1. Using 2 or more people, place the oven on its back on a

covered surface.

2. Install a foot on the left rear spacer using a #8-18 x ³⁄₈" screw.

NOTE: Position the foot so the long side of the foot is facing

toward the top of the oven.

A. Spacer

B. Foot

C. #8-18 x

3. In the same manner, install a foot on the right rear of the oven.

4. Install a front foot on the left front spacer using a #8-18 x ³⁄₈"

screw.

NOTE: Position the foot so the long side of the foot is facing

toward the inside of the oven.

A. Front foot

B. #8-18 x

C. Spacer

³⁄₈

" screw

³⁄₈

" screw

5. In the same manner, install a front foot on the right front of the

oven.

6. Using 2 or more people, place the oven in its upright position.

7. Go to the "Make Electrical Connection" section in the

Installation Instructions provided with your built-in oven.

Replace Plastic Spacers

Replace Plastic Spacers on Single Ovens

1. Remove the screw attaching the plastic spacer (A) to the right

side of the oven.

2. Using the screw removed, install a new plastic spacer (B)

provided with this kit.

A. Plastic spacer

B. New plastic spacer

3. In the same manner, remove and replace the plastic spacer

on the left side of the oven.

B. New plastic spacer