3onedata IES308 Manuel d'installation du matériel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} 3onedata IES308. 3onedata IES308 10 pages.

5. Power need: Redundant, dual 24VDC(12VDC~36VDC)

6. Environment: -40 to 75°C

Storage Temperature: -45°C to 85°C

Relative humidity 10% to 95%

DIN-Rail Installation

In order to use in industrial environments expediently, IES308

series adopt 35mm DIN-Rail installation, the installation steps as

fellows:

1. Examine the DIN-Rail attachment

2. Examine DIN Rail whether be firm and the position be suitability

or not .

3. Insert the top of the DIN-Rail into the slot just below the stiff

metal spring.

4. The DIN-Rail attachment unit will insert into place as shown

below.

Wiring Requirements：

Be sure to disconnect the power cord before installing and/or wiring

your Ethernet Switch.

Calculate the maximum possible current in each power wire and

common wire. Observe all electrical codes dictating the maximum

current allowable for each wire size. If the current goes above the

maximum ratings, the wiring could overheat may causing serious

damage to your equipment. You should also pay attention to the

following items:

1. Use separate path to route wiring for power and devices. If

power wiring and device wiring paths must cross, make sure the

Your Serial and Data Communications Expert

Shenzhen 3onedata Technology Co.,Ltd