Abt G100-36L Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Abt G100-36L. Abt G100-36L 2 pages. G100-xxl series 12.8v-38.4v (4s-12s) li-ion/polymer/lifepo4 battery charger

Imprimer la page

G100-XXL is a main member of digital-chargers from

Electronics CO.,LTD

. It represents today's new technology for 12.8V(4s) ~

34.8V(12s)

Li-Ion/Polymer/FePo4

programmed 3 auto stages ( Ip-Im-Um) charging process，It is designed for

3~25Ah Li-Ion/Polymer/LiFePo4 battery pack. Stage "Ip"

function for deep discharged battery pack, this is helpful for battery's cycle life.

When the battery recovered by pre-charge small current, stage "Im" will give

bulk current charging. Then, "Um" stage is followed, the output voltage is

limited on 14.4V(for 4S LiFePo4) or 16.8V(for 4S Li-ion/polymer), until the

charge current declined to 0.4A. At this stage, the battery is charged

completely and the charger will cut off output automatic.

Further, G100-XXL can display the charging process, indicate the battery

capacity from 25% to 100% timely. This is helpful for user.

For more safety, G100-XXL will inter protection mode when the battery

polarity reversed our the output connectors shorted.

Specification for G100-XXL

Input Voltage

100-240VAC，50-60Hz

Input Current

1.6A

Back current drain 1） <1mA

Charge voltage limit

G100-12LF

14.4V+-1%

Bulk charge current

4.5A+-5%

Operate Temperature

-20℃~50℃

Natural convection. Do not cover the charger.

Cooling

Charge principle

Auto 3 stages: Ip-Im-Um

Cut-off when charge finished.

From 12.8V(4s) to 38.4V(12s), Li-ion/Polymer/LiFePo4

Battery type

Battery capacity

3-25Ah

Size

170X70X51mm

Dust protected, Water splashing resistance)

Enclosure

IP54 (

Weight

400g

Shenzhen ABT

battery

pack

charging.

G100-XXL

is a pre-charge

G100-24L

G100-36L

G100-36LF

29.4V+-1%

42V+-1%

43.2V+-1%

2.8A+-5%

1.8A+-5%

Display Panel

Power on

(When

input OK)

Charging process indicator:

Indicate battery capacity from 25% to 100% when

charging.

All lamps flashing means battery polarity reversed or

output shorted.

All lamps are "off" means no battery.

How to use:

Connect the AC cord to the socket, The "power" lamp will light on solid.

Connect positive charger clip (red) to positive battery terminal, the black clip

to negative. (You can use other dc plugs to connect battery), the

"25%~100%" lamps will light on flowing. If the battery polarity reversed or

output shorted, "Warning" lamp will flashing, please check the setup.

Depend on the charged capacity, 25%~100% lamps will lights up solid

sequence, until the battery is fully charged. Then you can power off the

charger and disconnect the battery or you can charge a new battery if you

need.

The table shows the duration of 80% state charged for an empty battery.

G100-12LF

Battery cap.

3.2Ah

Not recommend

7.0Ah

2 hours

12Ah

3 hours

25Ah

6 hours

G100-24L

G100-36L

1.5 hours

2 hours

3 hours

4 hours

5 hours

7 hours

10 hours

13 hours