Anybus Wireless Bridge II Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Anybus Wireless Bridge II. Anybus Wireless Bridge II 17 pages.

Imprimer la page

Installation

Anybus Wireless Bridge II can be screw-mounted directly onto a flat surface or

mounted on a standard DIN rail using the optional DIN mounting kit.

Make sure that you have all the necessary information about the capabilities and

restrictions of your local network environment before installation.

For optimal reception, wireless devices require a zone between them clear of ob-

jects that could otherwise obstruct or reflect the signal. A minimum distance of

50 cm between the devices should also be observed to avoid interference.

The characteristics of the internal antenna should be considered when choosing

the placement and orientation of the unit (unless an external antenna is used).

See the Anybus Wireless Bridge II User Manual for more information.

Anybus

Wireless Bridge II

Caution

This equipment emits RF energy in the ISM (Industrial, Scientific,

Medical) band. Make sure that all medical devices used in proximity to

this device meet appropriate susceptibility specifications for this type of

RF energy.

This product is recommended for use in both industrial and domestic

environments. For industrial environments it is mandatory to use the

functional earth connection to comply with immunity requirements. For

domestic environments the functional earth must be omitted if a shielded

Ethernet cable is used, in order to meet emission requirements.

This product contains parts that can be damaged by electrostatic

discharge (ESD). Use ESD protective measures to avoid equipment

damage.

™

Installation Guide

5 (16)

SCM-1202-013/SP2167 1.1