Anybus Communicator CAN PROFINET IRT 2.32 Manuel d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Anybus Communicator CAN PROFINET IRT 2.32. Anybus Communicator CAN PROFINET IRT 2.32 2 pages. Interface
Également pour Anybus Communicator CAN PROFINET IRT 2.32 : Manuel du réseau (20 pages)

Imprimer la page
Anybus Communicator - PROFINET IRT (2.32) Interface

Front View

LED Indicators
Network Status
Link Activity 1
Subnet Status
LAN Port 2
LAN Port 1
1
8

Bottom View

PC Connector
1
1.
GND
2.
GND
3.
RS232 Rx
4
4.
RS232 Tx
1
9
6
5
1
Power Connector
1.
+24 V DC
2
2.
GND
SP2193 1.01 Dec 2016
LED Indicators
LED
1
2
Module Status
Link Activity 2
3
4
5
6
Device Status
1 (Network Status)
LAN Connector (RJ-45)
1.
TD+
2 (Module Status)
2.
TD-
3.
RD+
4.
(reserved)
5.
(reserved)
6.
RD-
3/4 (Link Activity)
7.
(reserved)
8.
(reserved)
5 (Subnet Status)
6 (Device Status)
Subnetwork Connector
1.
+5V OUT
2.
RS-232 Rx
3.
RS-232 Tx
4.
NC
5.
Signal GND
6.
RS-422 Rx+
7.
RS-422 Rx-
8.
RS-485+/RS-422 Tx+
9.
RS-485-/RS-422 Tx-
Indication
Meaning
Off
Offl ine
- No power
- No connection with IO Controller
Green
Online (RUN)
- Connection with IO Controller established
Green, 1 fl ash
Online (STOP)
- Connection with IO Controller established
- IO Controller in STOP state or IO data bad
- RT synchronization not fi nished
Green, blinking
Node identifi cation (see manual)
Red
Fatal error
Red, 1 fl ash
Station name error
Red, 2 fl ashes
IP address error
Red, 3 fl ashes
Confi guration error
Alternating Red/Green
Firmware update in progress
Off
No power or initializing
Green
Normal operation
Green, 1 fl ash
Diagnostic event present
Red
Fatal error
Alternating Red/Green
Firmware update in progress
Green
Link OK
Green, fl ickering
Transmitting/receiving data
Off
Link not detected or no power
Green, fl ashing
Running, one or more transaction errors
Green
Running
Red
Transaction error/timeout or subnet stopped
Off
No power
Green
Initializing
Green, fl ashing
Running
Red
Bootloader mode
Alternating red/green
Confi guration error

Installation Guide

Accessories Checklist
The following items are required for installation:
•
Anybus Confi guration Manager - Communicator RS-232/422/485
(available at www.anybus.com)
•
RS-232 confi guration cable
•
Subnetwork connector
•
PROFINET network cable and connector (not included)
Installation and Startup Summary
1.
Mount the gateway on the DIN rail
2.
Connect the gateway to the PROFINET network
3.
Connect the gateway to the subnetwork
4.
Power on the gateway
5.
Connect the confi guration cable between the gateway and
the PC containing Anybus Confi guration Manager
6.
Confi gure the gateway using Anybus Confi guration Manager
7.
Confi gure and start the PROFINET network
www.anybus.com