AnyCall AY-CPAL45PLUS-C4 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AnyCall AY-CPAL45PLUS-C4. AnyCall AY-CPAL45PLUS-C4 14 pages.

Imprimer la page

Safety Information

The Federal Communications Commission (FCC) has tested this product and found it to
comply with their RF Exposure Requirements, pursuant to FCC Part 22 and 24.
IC Certification:
The signal booster is compliance with the requirements of the standards ICES-003 applied.
CE Certification:
The product is certified for CE and RoHS compliance in accredited Eurofins Test Lab in Belgian.
As the certifications put it, the device fully meets European safety and quality requirements.
To comply with the FCC RF exposure requirements, keep the human user's body at least 8"
(20cm) from the indoor antenna of the booster.
Don't expose this product to extreme low or high temperature (-20℃ and 55℃).
There are no consumer serviceable or modifiable parts inside this booster product.
Alteration or abuse of the booster or other components will void this product's warranty,
and could be dangerous to the user.

Install the Booster

1
Automatic Gain Control (AGC):
The booster can detect the level of available incoming signal, then adjust itself for best
performance.
2
Self-oscillation Elimination:
The booster detects self-oscillation, first reduces the link gain, then detects the loop, and
finds that the self-oscillation is eliminated, the system returns to normal working state,
otherwise, the power is turned off to prevent interference signal.
3
Inactivity Mode:
When no user calls, the device works in standby mode, the uplink power amplifier is
switched off, and the static power is decreased by 30%, so as to achieve the purpose of
energy saving.
4
Automatic Power Shut-down:
When the self-oscillation happens and the link attenuation value reaches 20db, the MCU
sends out the instruction and shut-down the PA.
English

Package Contents

1. Signal Booster
3. Patch Antenna
6. User Manual (this document)
Signal Booster
DC Car Charger
Usually you should get the mobile booster kit, it includes everything you need for
installation. Before using it, please confirm your booster's frequency range is correct with
your service network, otherwise, the amplifier will not proper working for you.

Before Getting Started

Before you install your Signal Booster and start enjoying amplified signals in your vehicle,
please check the frequency band of your cell phone :
The booster can work well only if your cell phone works on same frequency band as the
booster. Please check which band your cell phone uses firstly using the methods below:
(1). For iPhone:
Dial *3001#12345#*, then press Call button
Click 'Serving Cell Info'
Check 'Freq Band Indicator'
(2). For Android Phone:
Download and install the app: LTE Discovery, tap 'SIGNALS' and check band number.
The result should be a one-digit or two-digit number, please check if it matches with the
band of the booster you have ordered or not. If the band of the phone can't matched with
that of the booster, please contact with us via amazon.
2. Magnet Mount Antenna
4. DC Car Charger
Magnet Mount
Patch Antenna
Antenna
User Manual
(this document)