Airush Starboard Freewing Air 6 Manuel de l'utilisateur - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Airush Starboard Freewing Air 6. Airush Starboard Freewing Air 6 20 pages.

Imprimer la page

Airush Starboard Freewing Air 6 Manuel de l'utilisateur

2. TAKING OUT THE BLADDER:

Disconnect the pipe from the strut, take oﬀ the valve if the wing is ﬁtted with it. Tie

WINDOW

one line on each side of the leading edge (wingtips), and take the leading edge

bladder from the zipper.

3. LOCATE THE LEAK AND REPAIR:

Use a water spray or sink the bladder into a pool or a bath tub. Once you locate

the leak, dry up the area, make a circle around it with a pen, sand the area, then

stick the repair patch (enclosed with the repair kit).

4. INSERT THE BLADDER INTO THE WING USING BOTH LINES:

WINDOW

Pump it softly and make sure there are no wrinkles when the bladder reaches

some pressure. Do not pump fully at the psi recommendation until the bladder is

perfectly inserted.

WINDOW

- 17 -