Anyload T15 Series Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Anyload T15 Series. Anyload T15 Series 12 pages.

Ex. When display shows [p 0.000] ，Press "PRINT" key，the division set as 0.000，then

enter the maximum capacity setting.

3. Maximum capacity setting：

LCD shows [ FULL ] around 2-3 seconds then LCD shows [000.000]

the decimal point

was set as 3 decimal points，then press "TARE" key to move the flashing digits to the right in

circle to select the digits that will increase the number，then press "ZERO" key to increase the

number until the number appears ， then repeat the above moves until LCD shows the

maximum capacity then press "PRINT" key to enter calibration setting

Ex. LCD shows [50.000] then press "PRINT" key to enter calibration setting

4. Zero point calibration：

LCD shows [CaL 0 ]

Do not put any objects on the pan when display shows this, then

scale will move to next calibration setting.

5. Second point calibration：(unit is in kg)

LCD shows [00.000]

the decimal point was set as 3 digits. (this depends on what

user sets in the last moves). Put on the weights on the pan which will be calibrate as

second point then use "TARE" key to move the flashing digits to the right in circle to select

the digits that will increase the number，then press "ZERO" key to increase the number until

the number appears，then repeat the above moves until LCD shows the numbers which is

equal to the weights put on the pan, then wait until the scale is stable then press "PRINT"

key , scale will move into the weighing mode then press "calibration" key to confirm calibration

finish

B. Fast calibration mode:

Press and hold "PRINT" key，then turn on the scale，then press "FUNCTION" key to enter

calibration mode: (the division, decimal point and max. point will remain the same)