addex AD500 Manuel d'instruction - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} addex AD500. addex AD500 11 pages. Led digital fm clock radio with projection usb charging function

Imprimer la page

1. Before Setting

BEFORE SETTING

Plug the AC/DC adaptor to an AC household outlet, and then

plug the DC jack to the back of the unit. (DC5.5V plug)

Your AD500 clock radio is ready.

BACKUP BATTERY INSTALLATION

Your AD500 clock radio requires the CR2032 lithium battery

(included) to provide backup power to the clock in case of tem-

porary power interruption.

1. Place your unit face down on a flat surface.

2. Slide and remove the battery cover at the bottom of your unit.

3. Insert the CR2032 lithium battery into the battery compart-

ment with the "+" side facing up as indicated on the battery

cover.

4. Replace the battery cover.

Purpose: If AC power is interrupted, the LED display will go off

and both the radio and the alarm will not function. The backup

battery will keep the time and all settings of your unit. Make sure

a fresh CR2032 lithium battery is used. A fresh CR2032 battery

could backup your clock continuously for around 3 days.

SETTING THE TIME, 12/24HR FORMAT AND THE SNOOZE

DURATION

1. Press SET once, the hour digits flash. Press

current hour (hold to advance rapidly).

2. Press SET again, the minute digits flash. Press

minutes.

3. Press SET again, the display shows "24H" and flashes, Press

to select "12H" or "24H" time format.





4. Press SET again, the display shows "05" and flashes, Press

to select your snooze time from 5 to 60 minutes.





to set the





to set



