AirVac AV2500 Manuel du propriétaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AirVac AV2500. AirVac AV2500 6 pages. Airvac av2500; av5500 central vacuum system
Imprimer la page
Electric Accessories
Deluxe High
Performance 30' High/Low Voltage Hose.
Feature High/Low voltage switch to turn both
on electric carpet brush On/Off and the
system On/Off.
30' Extension Cord
(w/10 cord ties)
Used to plug the electrical outlet to the
electric brush when using the standard hose.
Stretch Hose
This attachment is
used for quick clean-up
jobs. The hose expands
from 3.5' to 21'.
Wall Valve or canister which contains LED's
The wall valves or vacuum canister in your home may have a LED indicator. This
LED provides information on the system performance.
Red and Blue Series
•Green . . . .
Indicates that power is present at the vacuum canister.
•Off . . . . Indicates that power is not present at the vacuum canister.
Gold Series
• Green . . . . Indicates the power is present at the vacuum canister.
Flashing Green or Flashing Amber . . . . Indicates the bag or bucket
is full.
• Amber . . . . Indicates the motor has passed 50% of its brush life.
• Red . . . . Indicates the end of motor brush life. Call your local dealer
for service.
Reset:
To reset a flashing LED, press the main power switch on the front of the vacuum canister down
momentarily and release. The flashing LED should return to solid.
Electric Carpet Brush
Features an electric-powered beater bar and
brush to get the deepest ground-in dirt and
grime. Turn off the power brush to clean hard
surfaces.
Assembling the Super Latch System
1. Slide wands together.
2. Push assembled wands into electric brush
swivel socket.
3. Place electric cord between cord guides;
turn into position.
4. Press cord into channels. Push wands
into swivel.
5. Insert handle end of hose into assembled
wands.
6. Press wand position pedal at Power
Nozzle to move wand into vacuuming
position.
7. To release entire wand assembly, hold
hose and lift firmly while stepping on wand
release lever. DO NOT remove plug by
pulling on cord; this may cause wire
damage.
Wand Position Lever
Wand Release Lever
Height Adjustment
Lever
WARNING
ELECTRICAL SHOCK HAZARD
Do not plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or injury.