ABTECH SAFETY SLIX100XL Manuel d'instruction et d'entretien - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et d'entretien pour {nom_de_la_catégorie} ABTECH SAFETY SLIX100XL. ABTECH SAFETY SLIX100XL 20 pages.

Imprimer la page

ABTECH SAFETY SLIX100XL Manuel d'instruction et d'entretien

Suggested Fitting Of Vertical Haul and

Lifelines to the Slix Stretcher

It is important that the bights on

the double Fig. 8 knots are even.

Do not tie a single loop Fig 8 and

then attach to the karabiners as

this will cause the head of the

stretcher to curl excessively.

SEE PAGE 13 FOR IMPORTANT

CONSIDERATIONS

Fig. 1.

Vertical Haul Lifeline

Attach the haul line 'A' to 2 screw gate

karabiners with a double fig.'8' knot, (keep bights

short), and attach to the Vertical haul points 'S'

Tighten the screw gates on the

Attach the Lifeline 'C' to a screw gate karabiner

with a fig. '8' knot, and attach the karabiner to the

Horizontal Haul point

on the karabiner.

A karabiner 'E' is clipped over the Lifeline 'C' and

then into the bight of the haul line.

This will prevent the stretcher hanging sideways

in the event of a Haul line or main belay failure.

Alternative Vertical Lifeline

Attachment

When using this method all of the

haul points must

be used to ensure that the load is

karabiners.

'0'.

Tighten the screw gate

Fig 2

shared.