AnyTone AT-D578UV Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AnyTone AT-D578UV. AnyTone AT-D578UV 4 pages. Bluetooth(bt)
Également pour AnyTone AT-D578UV : Paramètres avancés (5 pages), Comment mettre à jour le micrologiciel (17 pages)
Imprimer la page
Getting Started
5.
Step One: Pairing the radio with BT PTT button
Press the BT PTT button, so the blue light is blinking. The BT PTT is now in
●
pairing mode.
Turn on radio and go into bluetooth menu, turns BT On in BT On/Off menu.
●
Scroll down to BT PTT Pair menu, enter into PTT Pair, the radio is now in
pairing mode.
Place the BT PTT button near the radio and wait. Within a few seconds, the
●
devices should pair with each other.
Once paired, the LED on the BT PTT will turn off, and the radio will show a
●
blue "P" icon on the top line of the display.
Step Two: Pairing the radio with a Car Audio System or a Bluetooth
earpiece
Turn on the car audio system and set it to bluetooth pairing mode (same
●
operation for the BT earpiece).
Scroll the radio menu to BT Pairing menu, enter into Seek PTT, the radio
●
will start seeking a BT device to pair with.(The BT must be on in BT On/Off
menu.)
Locate the radio near the car audio system or bluetooth earpiece and wait.
●
Within a few seconds, the radio will show available BT names, select the BT
name ELEC.... and start pairing.
Some cars require a 6 digit pin code for BT connection. Enter this code into
●
the BT pin code menu and wait for pairing.
Once paired, the radio will have the blue BT icon show on the top of display.
●
Notice: The radio can only connect to one BT module at a time, either the
Car Audio System or the Bluetooth earpiece.
Step Three: Transmit and Receive Operation
Push-to-Talk can be activated by any of the following methods:
Pressing and hold the PTT button of the radio itself.
●
Pressing and hold the PTT button on BT PTT (if the BT PTT has been
●
paired with the radio per Step One above).
When transmitting, the operator's voice is picked-up by:
The car audio system. (after a car audio system has been paired to the
●
radio).
The microphone in the Bluetooth earpiece. (after a bluetooth earpiece has
●
3