AnyTone DORIS Manuel d'instruction - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AnyTone DORIS. AnyTone DORIS 14 pages.
Imprimer la page
1.11
1.12
1.13
1.14
1.15
1.16
1.17
1.18
1.19
1.20
1.21
1.22
DORIS CB
Radio
Microphone type
settings
Microphone
sensitivity settings
TALK BACK function
settings
NC function settings
NG function settings
PA function settings
VOX sensitivity
settings
VOX delay time
settings
SWR protection
settings
Power on display
settings
RX NRC(Noise
reduction) function
setting
Factory reset settings
DY：Dynamic MIC
EL：Electronic MIC
Default: EL
1~9, total 9 levels, the higher level the higher
sensitivity of microphone;
Default: level 6
OFF/ 1~9, total 10 levels, the higher level the
louder it will sound;
Default: OFF
OFF：turn off NC function;
ON：turn on NC function;
Default: OFF
OFF：turn off NG function;
ON：turn on NG function;
Default: OFF
OFF：turn off PA function;
ON：turn on PA function;
Default: OFF
1~9, total 9 levels, the higher level the higher
sensitivity of VOX;
Default: level 3
1~9, total 9 levels, the higher level the longer
delay time of VOX;
Default: level 4
OFF/ 2.0/ 2.5/ 3.0/ 4.0/ 5.0/ 10.0, OFF is to
turn off SWR protection function
Default: OFF
DEF PIC: default picture display
USET PIC: Customized picture display (can be
written by PC software)
CHAR: indicates the name
BAT: voltage display
Default : DEF PIC
OFF: Turn off NRC function
ON: Turn on NRC function
Default: OFF (**Optional function, only have
this function when NRC PCB added)
ALL the channels, function settings will be
back to factory default settings
8