DuctSox U-Track Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DuctSox U-Track. DuctSox U-Track 16 pages.

Elbows

Radius tracks are manufactured to match the radius of the DuctSox. This is typically 1.5 times the

diameter of the DuctSox. For example, the inside radius track of a 24" diameter DuctSox would have a

radius of 25.6".

24" x 1.07 = 25.6

((24" x 1.5) - (24"/2 x .866) = 25.6")

And the outside radius track of a 24" diameter DuctSox would have a radius of 46.4".

24" x 1.93 = 46.4"

((24" x 1.5) + (24"/2 x .866) = 46.4")

Install at least one support per radius section, in the center if possible.

Coupler will not go into radius track the full 6" (and it shouldn't). Coupler must only be inserted into radius

track 1.5"( this connection will only use one screw in the radius track portion. There will be 3" radius

couplers when splicing radius-to-radius connections.)

Radius track will only work with DuctSox that are installed in a true horizontal plane (Figure A).

Vertical elbows are supported by D-ring straps rather than radius track (Figure B).

Figure A

Figure B

Installation Guide: U-Track