ABTECH SAFETY AB15RT Manuel de l'utilisateur abrégé - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur abrégé pour {nom_de_la_catégorie} ABTECH SAFETY AB15RT. ABTECH SAFETY AB15RT 8 pages. Torq range of inertia reel fall arresters
Imprimer la page
TORQ AB15RT
Release the winding handle docking mechanism.
Pull out the winding handle locking pin. Turn the winding handle
anticlockwise while pushing down on the handle shaft in order
to engage the winding gear.
Release the locking pin and ensure that the winding handle is
locked in gear.
The person can now be raised or lowered by winding the
handle clockwise or anticlockwise.
There should be direct or indirect visual contact or some other
means of communication with the person at all times during the
process.
The lifting/lowering function may be used for lifting/lowering
loads up to 150kg.
The lifting facility should only be used if an unhindered lifting
process is possible and that it shall not be used if obstacles
present as hazard.
Ensure there is no slack line when the device is in rescue
mode.
When retrieving an individual to an upper level ensure that the
anchor point allows clearance from the access point to enable
the retrieved individual to climb or be lifted clear of the access
point.
Cleaning, Drying, Storage and Transportation
The TORQ Inertia Reel Fall Arrester casing and wire should
be cleaned using water of domestic supply quality at <40ºC. A
mild, neutral pH soap/disinfectant may be used in the event of
extreme soiling, or if the device has been exposed to
hazardous environments (e.g. drains, biohazards, etc).
This device should be stored in a cool, dry, clean, chemically
neutral environment away form sources of heat and exposure
to UV light.
Care should be taken during transportation in order to avoid
hazards that may result in damage to the device or injury to
person(s).
Lifespan
This TORQ Inertia Reel Fall Arrester should be subject to a
service at least once a year by a trained and competent person
(this must be an Abtech Safety approved service agent). In the
event of an arrested fall the device should be immediately
removed from service and returned to the
supplier/manufacturer for service.
If the TORQ is regularly serviced, correctly stored and not
subject to extreme environments or working conditions then the
manufacturer recommends a 10 year life from date of first use.
In the event of any doubt whatsoever please seek the advice of
a trained and competent person or the supplier.
Product Details
This manual must be provided to and retained by the user.
The Product Code, Serial Number and date of Manufacture of
this TORQ Inertia Reel Fall Arrestor should be entered on the
back page of this manual for future reference and inspection
records.
Note: The device serial number is laser etched into the device
swivel connector, with the exception of the AB2.T, which has a
sewn label on.
About This Manual
This User Manual is for English speaking countries only. If you
require this manual in a different language, please Contact
Abtech Safety. When this item is sold on, this manual must
accompany it and be supplied in the language of the
destination country.
Product Conformance
TORQ Inertia Reel Fall Arrester all conform to BS
EN360:2002 Personal protective equipment against falls from a
height - retractable type fall arresters.
In addition the TORQ AB15RT conforms to BS EN1496:2006
Class A and B - rescue lifting device.
TORQ self retracting lifelines all conform to ANSI/ASSE
Z359.14.2012 American National Standard - Safety
Requirements for Self - Retracting Devices for Personal Fall
Arrest and Rescue Systems.
These devices must be used in accordance with national
regulations governing occupational safety.
The TORQ range is available in various line lengths to suit a
user's specific requirement. The maximum working length is
designated by the model number i.e. a TORQ AB6T has a
maximum working length of 6m. The 15m device is also
available with a built in winch mechanism and is designated
15RT.
Average arresting force when dynamically tested in accordance
with the ANSI Z359.14-2012 section 4.2.1
TORQ AB2.4T - 2.85kN
TORQ AB6T - 2.60kN
TORQ AB10T - 2.96kN
TORQ AB15T - 5.25kN
TORQ AB15RT - 5.25kN
Abtech Safety Ltd,
1&2 Parkway Business Centre,
Sixth Avenue, Zone 2,
Deeside Industrial Estate,
Tel: +44 (0)1244 837 050
Fax: +44(0)1244 837 051
www.abtechsafety.com
CH5 2LE