2connect CAM-FT6 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 2connect CAM-FT6. 2connect CAM-FT6 4 pages. 2-in-1 reversing camera/brake light solution with wireless controller
Imprimer la page
Wide Angle
(Select from HUD Menu)
Birds-Eye
(Select from HUD Menu)
Adjusting Settings
To adjust settings for all viewing modes, press A from the HUD menu to enter the settings menu.
Once in the settings menu, short press A to cycle through the various settings screens available. Screens
include camera angle and position for each mode, and guideline width for parking lines.
Once in a settings screen, the selected setting is indicated by the icon in the centre of the display. The
parameters can be adjusted with B and C.
To return to the previous screen, Press and hold A.
Activating/Deactivating Blind Spot View (BSV) Mode
When in any of the settings screens, a long press of B will activate or deactivate BSV (Blind Spot View).
When active, this will trigger the blind spot camera image when an indicator is activated and the vehicle
is moving at a speed of over 40km/h.
When inactive, using the indicators will not trigger the blind spot view and the camera will remain in
Driving/Rear-View mode.
Note: this function will only work if the CAN-Bus wiring is connected.
4
Adjust paramater
B
(Short Press)
Activate/Deactivate BSV
(Long Press)
www.connects2.com
Connects2Vision
Right Blind Spot
(Triggered by Indicator - See Page 4)
Left Blind Spot
(Triggered by Indicator - See Page 4)
Move to next setting
(Short Press)
Return to previous
(Long Press)
A
Currently selected
setting
C
Adjust parameter