3onedata NP30XT series Manuel de l'utilisateur - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 3onedata NP30XT series. 3onedata NP30XT series 20 pages. Serial device server

Imprimer la page

4.3 Overtime time configuration

Please check the table 4.3.1

Overtime time is defined as: after enter into CLI configuration mode, overtime time with none operation,

after over time, will go to user mode automatic, re-identify user name and password

Operating

The configuration of

overtime time

Example: Configuration System overtime time: 10 minutes, enter the bold type command as follows and enter

return key:

Switch (manage)# set 10

[OK]

4.4 IP address, default gateway

Please check the table 4.4.1

Operating

Configuration of IP

address

Default gateway

Example: Configure IP address:192.168.1.254, subnet mask; 255.255.255.0, default gateway: 192.168.1.1,

enter the bold type command as follows and enter return key:

Switch(Manage)# ip 192.168.1.254 255.255.255.0

[OK]

Switch(Manage)# gateway 192.168.1.1

[OK]

4.5 User name, password configuration

Please check the table 4.5.1

Operating

User name

Hostname <hostname>

Password

Password <password> <password>

4.6 Factory default

Please check the table 4.6.1

Operating

Factory default

Example: If need factory default, enter the bold type command as follows and enter return key:

Switch（manage）# restore

Command

<time_out>: Overtime time, value[0-60], unit: minute, default

Set <time_out>

time: 5 minutes, if 0 minute, the function is closed

Command

Ip <ip_address> <mask>

Gateway <gateway>

Command

Restore

Table 4.3.1

Description

Table 4.4.1

<ip_address>：ip address

<mask>：subnet mask

<gateway>： gateway address

Table 4.5.1

<hostname>：only character and digit in legal

<password>：only character and digit in legal

Table 4.6.1

Carry out under the view of device information

Page15

CLI user manual

Description