Concorde A80 Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Concorde A80. Concorde A80 8 pages.

Imprimer la page
1.
In on-hook state, press HOLD/RING/÷ key, LCD display RING 01.
2.
Press UP/- or DOWN/+ key to select ring tone.
Besides, you can also press HOLD/RING/÷ key repeatedly to select the ringer.
ONE-TOUCH MEMORY
Storing a number into one-touch memory
1.
In on-hook state, pre-dial the desired number or review the incoming or outgoing list for the desired
number to store.
Press SET key, then press M1 – M3 key to store the number.
2.
Make a call from one-touch memory
In on/off-hook situation, press M1 – M3 key to dial out the stored number. The telephone will add PABX code
ahead the number if the number is 6-digit or more than 6-digit.
FLASH FUNCTION
If you exchanger has some special function, for example, Call waiting or Conference, you can press FLASH
key to get it. This unit flash time is 100 ms.
PAUSE FUNCTION
If dial a number from PABX extension, press PABX number (normally "0" or "9") + VIP/P + desired number.
When redial, need not dial PABX number and VIP/P key, just press REDIAL key.
CALCULATOR FUNCTION
In on-hook or off-hook state, press CAL key, LCD displays 0, the unit is in calculator state.
The unit is available for operation of "+.-.×.÷", in the calculator state, #/=key is used as "="and the ＊/. key is
used as radix point, OUT/× and HOLD/RING/÷ are used as × and ÷ respectively. UP/- or DOWN/+ key is used
as sign of minus /plus.
E.g.1 (10+26) ÷2
1. In on-hook state, press CAL key.
2. Press (1, 0, +, 2, 6), ÷, 2, #/= keys.
3. After calculated, press DEL key to quit.
E.g.2 0.5× 0.6-1
1. In on-hook state, press CAL key.
2. Press 0, ＊., 5, ×, 0, ＊., 6, -, 1, #/= keys.
3. After calculated, press DEL key to quit.
SWITCH
Ring volume switch
Slide the RING switch to select ringing volume HI (high), MID (middle) or LO (low).
NOTES
Please unplug telephone line when install or replace batteries.
TROUBLE SHOOTING
No voice
Check if the handset is on the phone or line is broken.
Battery rust or leak
Replace the batteries.
Noise
7