DUDOFF GD-Z01 Manuel d'installation et d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} DUDOFF GD-Z01. DUDOFF GD-Z01 17 pages. Built-in gas hob domino
Imprimer la page
IMPORTANT:
always disconnect the appliance from the gas
and electricity mains before carrying out any
cleaning operation
2) GAS HOB
Periodically wash the hot plate, the enamelled stell
pan support, the enamelled burner caps "A", "B" and
"C" and the burner heads "T" (see fig. 6 and 7) with
lukewarm soapy water. They should also be cleaned
plugs "AC" and flame detection "TC" (see fig.6).
Clean them gently with a small nylon brush as shown
(see fig. 7/A) and allow to dry fully. Do not wash in
the dishwasher. It is very important to clean the
surface soon after every use, when the glass is still
tepid.
Do not allow vinegar, coffee, milk, salted water,
lemon or tomato juice from remaining in contact with
the enamelled surfaces for long periods of time.
Do not clean using abrasive metal scourers, powder
abrasives or corrosive sprays.
WARNINGS:
when reassembling the components, observe the
following recommendations:
- check that the holes in the burner heads "T"
(fig. 6) are not blocked by foreign bodies.
Note: continuous use could cause
the burners to change colour due to
the high temperature.
CLEANING
FIG. 6
- Ensure that the enamelled covers "A", "B" and
"C" (fig. 6 and 7) are correctly positioned on the
burner head. The covers are correctly
positioned on the head when they are perfectly
stable.
- If the opening and closing of any valve is
awkward, do not force it but request urgent
intervention by the technical assistance
service.
- The pan support must be placed in the
appropriate centering pins (Or on the
aluminium profile if present). Verifying the
perfect stability.
- To prevent difficulties with lighting, regularly
clean the ignition elements (ceramic and
electrode) and safety cut-off devices (fig.7/A).
- Do not use jets of steam to clean the appliance.
IMPORTANT:
when removing the burners to clean them, ensure
that all parts are correctly positioned before relighting
them.
FIG. 7
FIG. 7/A
6