Duerkopp Adler 251-140042 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Duerkopp Adler 251-140042. Duerkopp Adler 251-140042 20 pages. Auto high speed lockstitch sewing machine

Imprimer la page

6. INSTALLING THE BELT COVER

WARNING:

To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine

and check to be sure that the motor has totally stopped rotating in prior.

7. ADJUSTING THE HEIGHT OF THE KNEE LIFTER

WARNING:

To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine

and check to be sure that the motor has totally stopped rotating in prior.

1) The standard height of the presser foot lifted using the knee lifter is 10 mm.

2) You can adjust the presser foot lift up to 13 mm using knee lifter adjust screw

3) When you have adjusted the presser foot lift to over 10 mm, be sure that the bottom end of needle bar

in its lowest position does not hit presser foot

-3-

. (Max. 9 mm for A type)