Duerkopp Adler 506 Manuel d'instructions d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Duerkopp Adler 506. Duerkopp Adler 506 8 pages.
Également pour Duerkopp Adler 506 : Manuel d'utilisation (17 pages)
Imprimer la page
3. Electrical Connection
3.1 Connecting the Microcontrol Control Unit
ATTENTION !
All work on the electrical components of the sewing unit may be
carried out only by electricians or appropriately trained personnel.
The mains plug must be pulled.
The Microcontrol control unit is equipped with the catch plate 1 for
quick attachment and removal.
1
–
Place the Microcontrol control unit on the catch plate 1 and push
back until it catches.
–
Make the cable connections.
Attention !
Insert the plugs carefully into the back of the control unit.
In as far as these are present, match the designations on the
cables and the unit back.
Also observe the different outfitting of the plugs with contact pins
or contact sockets, as well as their number and arrangement.
–
Tighten the screws on the plugs.
5