Duerkopp Adler 550-16-26 Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Duerkopp Adler 550-16-26. Duerkopp Adler 550-16-26 19 pages. Sewing lamp led
Également pour Duerkopp Adler 550-16-26 : Instructions de montage (2 pages), Manuel d'utilisation (12 pages)

Imprimer la page

Duerkopp Adler 550-16-26 Manuel d'utilisation

4.6 Changing the Hook Thread Bobbin

Caution Risk of Injury !

Turn the main switch off .

Change the hook thread bobbin only with the machine turned off.

Removing the empty bobbin

–

Swing the hook cover 2 down.

–

Bring the needle bar in high position.

–

Lift the bobbin case flap 1.

–

Take out the bobbin case top 3 with the bobbin 7.

–

Remove the empty bobbin from the bobbin case top 3.

Inserting a full bobbin

–

Insert the full bobbin in the bobbin case top 3.

–

Pull the hook thread through slit 6 under the tension spring 5 until

in the drilled hole 4.

–

Pull the hook thread approx. 5 cm out of the bobbin case 3.

The bobbin must turn in the direction of the arrow when the thread

is pulled off.

–

Insert the bobbin case 3 again.

–

Close the bobbin case flap 1.

–

Swing the hook cover 2 up.