2connect Aerpro APVFT12 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 2connect Aerpro APVFT12. 2connect Aerpro APVFT12 8 pages. Interface for activation of factory rear-view camera input and video in motion

Imprimer la page
PIN ASSIGNMENT/INSTALLATION
Interface Pin Configuration
Cable Colour
Yellow
Blue
Yellow/Black
Blue/Black
Red
Black
Green
White
Installation
NB: Before installation, switch off ignition, disconnect the vehicle battery and
remove the vehicle'shead unit.
The interface is installed behind the vehicle's head unit. The RCA connectors
provide the factory aux signal and must remain connected.
Connecting Interface, Harness and Factory Navigation Unit
4
Pin-No. Assignment
Pin 4
CAN-HIGH – connection to the head-unit
Pin 3
CAN-LOW – connection to the head-unit
Pin 8
CAN-HIGH – connection to the vehicle
Pin 7
CAN-LOW – connection to the vehicle
Pin 1
+12V Permanent
Pin 5
Ground
Pin 6
Activation of video-in-motion function
(+12V = TV-free activated, only if Dip1=OFF)
Pin 2
Trigger output (+12V DC 500mA)
(only if Dip2=ON and reverse gear engaged!)
www.aerpro.com.au
Interface
Harness