Anzzi Ariadne LS-AZ913MB Manuel d'installation et d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Anzzi Ariadne LS-AZ913MB. Anzzi Ariadne LS-AZ913MB 3 pages. Vessel sink

Imprimer la page

VESSEL SINK

INSTALLATION INSTRUCTIONS

Before installing, read entire Vessel Sink Installation Instructions. Observe all local building and safety codes.

We recommend consulting a professional if you are unfamiliar with this type of installation. ANZZI accepts

Please inspect the unit immediately when received and report any damages right away to ANZZI's customer service

center at 305-614-4070.

TOOLS AND MATERIALS:

Damp Cloth

Silicone Sealant (for copper sinks, use Neutral Cure Silicone Sealant)

Thread Sealant

Basin Wrench

INSTALLATION

1. Carefully place the sink upside down on the counter with a towel

or other soft cloth beneath to prevent damage. Apply a

continuous bead of silicone to the base of the sink where it will

rest on the counter.

2. Turn the sink right-side-up and position it back over the 2" drain

hole.

3. Remove any excess silicone with a damp cloth. Let the silicone

dry for 24 hours. If a lavatory drain is included, move on to the

Drain Installation section.

DRAIN INSTALLATION

1. Disassemble the drain by removing the threaded tail piece, rubber sealing gaskets, friction washer and lock nut from

the drain body.

2. Place thread sealant on the threaded section of the tail piece and reattach to the drain body

sealing gasket up the tail piece to the top of the drain body. This gasket will create a water tight seal between the

3. Place the drain in the drain hole in the sink. On the underside of the counter, attach the tapered rubber gasket. With

4. Slide the friction washer up to meet the rubber gasket. Thread the lock nut onto the threaded shank. Hand-tighten

drain.

Thank you for choosing ANZZI® and enjoy your lovely new bath sink. We want to hear about your experience with us!

Please visit www.ANZZI.com and leave us a review. It will only take 5 minutes and we'd love to hear from you.

Need help? For technical support call

Perfection is our Tradition™

305-614-4070

or visit us at