Addi-Data MSX-E Series Description technique - Page 14

Parcourez en ligne ou téléchargez le pdf Description technique pour {nom_de_la_catégorie} Addi-Data MSX-E Series. Addi-Data MSX-E Series 20 pages.

Imprimer la page
Mounting and connection

1.3.1 Ethernet ports

In order to access the MSX-E system, you have to connect one of the Ethernet interfaces (Port 0 or
Port 1) to your PC. For this, you can use a CMX-6x cable.
To cascade the MSX-E systems with one another, you need a CMX-7x cable.
The LED display "Port 0 ACT/Link" or "Port 1 ACT/Link" gives you information on the status of the
corresponding interface. For more details, see Chapter 1.6.1.
Pin No.
www.addi-data.com
NOTICE!
The LED display only works if the MSX-E system is connected to
the voltage supply.
Table 1-1: Pin assignment: Ethernet ports 0 and 1
Ethernet Port 0
Female connector,
D-coded, M12
1
TD0+
2
RD0+
3
TD0-
4
RD0-
Ethernet Port 1
Female connector,
D-coded, M12
TD1+
RD1+
TD1-
RD1-
14
MSX-Exxxx
Cable (green)
Lead colour
yellow
white
orange
blue