Duevi SINT-13 Manuel d'installation et d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Duevi SINT-13. Duevi SINT-13 8 pages. Wireless voice synthesis receiver with activation
Imprimer la page
VOICE MESSAGES RECORDING
Before use SINT-13 it is possible to customize the voice messages (from 1 to 13) used.
Open the cover to access to electronic board: there are 2 buttons, 4 LEDs (green, yellow, blue and red) and
one jumper which are used to program the functions.
Enter in "Messages recording" mode
1.
Close the jumper JP1 on pins B and C.
As soon as the pins are closed:
LD1 (GREEN) lights solid on
LD2 blinks one time then stay solid on: SINT-13 is ready to record the Voice Message 1.
2.
Now it is possible to record the voice message:
Hold down the P2 button until the LD2 (BLUE) LED lights on.
Release P2 and talk about at 10 cm from microphone (MIC).
To stop the recording before the max 15 seconds available, press briefly P2.
3.
To move to next message position:
Press briefly P1. As confirm the LD2 LED blinks as many times as the number of the Voice
Message, then stay solid on
(Example: 3 blinks = message n° 3).
4.
To play the voice message in a certain position: press briefly the P2 (LD3 BLUE it blinks during the
play) button.
Proceed for all the messages in the same way.
Exit from "Messages recording" mode: open the jumper JP2.
7