Cascade 55G Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cascade 55G. Cascade 55G 16 pages. Fork positioner

Imprimer la page

TRUCK REQUIREMENTS

Truck Relief Setting

160 bar Recommended

210 bar Maximum

Truck Flow Volume

55G

100G

➀ Cascade K-Series Fork Positioner/Sideshifters are compatible

with SAE 10W petroleum base hydraulic fluid meeting Mil. Spec.

MIL-0-5606 or MIL-0-2104B. Use of synthetic or aqueous base

hydraulic fluid is not recommended. If fire resistant hydraulic

fluid is required, special seals must be used. Contact Cascade.

➁ Flow less than recommended will result in slow fork positioning

speed.

➂ Flow greater than maximum can result in excessive heating,

reduced system performance and reduced hydraulic system life.

Carriage Mount Dimension A-

Class II

Class III

GA0028.eps

Auxiliary Valve Functions

Check for compliance with ISO standards:

GA0082.eps

WARNING: Truck control handle and

attachment function activation shown

here conforms to ISO 3691 recommended

practices. Failure to follow these practices

may lead to serious bodily injury or property

damage. End user, dealer and OEMs should

review any deviation from the practices for

safe operation.

6047782-R2 EN

➀

➁

Min.

Recommended

15 L/min.

20 L/min.

30 L/min.

Minimum

Maximum

380.0 mm

381.0 mm

474.5 mm

476.0 mm

Tilt Forward

Hoist Down

Hoist Up

Tilt Back

➂

Max.

35 L/min.

40 L/min.

ISO

Sideshift Left

Spread Forks

Close Forks

Sideshift

Right

Carriage – Clean and inspect carriage

bars. Bars must be parallel and ends

flush. Grind smooth any protruding welds

that may affect Sideshifter lower bearings.

Repair any damaged notches.

GA0131.eps