Aobosi YC-100B Manuel d'instruction - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Aobosi YC-100B. Aobosi YC-100B 13 pages. Compressor wine cooler
Également pour Aobosi YC-100B : Manuel d'instruction (13 pages)
TROUBLESHOOTING
If you feel the appliance is out of order, follow these instructions to try to see if you can solve the
problem simply by yourself before calling for service.
PROBLEM
The Wine Cooler does not operate
The Wine Cooler is not cold enough
The compressor automatically
turns on and turns off frequently
The lighting does not work
Too much vibration
The Wine Cooler seems to make too
much noise
The door will not close properly.
The display window is shown with "HH"
or "LL" instead of a digital figure,
and/or with continuous buzz sound.
POSSIBLE CAUSE / MEASURE
1.Not plugged in.
2.The appliance is turned off.
3.The circuit breaker tripped or a blown fuse.
1.Check the temperature control setting.
2.External environment may require a higher setting.
3.The door is opened too frequently.
4.The door is not closed completely.
5.The door gasket does not seal properly.
1.The room temperature is hotter than normal.
2.A large amount of contents has been added to the
Wine Cooler.
3.The door is opened too frequently.
4.The door is not closed completely.
5.The temperature control is not set correctly.
6.The door gasket does not seal properly.
1.Not plugged in.
2.The circuit breaker tripped or a blown fuse.
3.The lighting is turned off.
1.Check to assure that the appliance is level.
2.Check to assure no parts inside the cabinet or in the
compressor chamber are loose.
1.The rattling noise may come from the flow of the
refrigerant, which is normal.
2.As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant.
3.Contraction and expansion of the inside walls may
cause popping and crackling noises.
4.The appliance is not level.
1.The wine COOLER is not level.
2.The door was reversed and not properly installed.
3.The gasket is dirty.
4.The shelves are out of position.
The temperature probe is out of order.
12