Cascade KB-8888 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Cascade KB-8888. Cascade KB-8888 9 pages.

CAUTION!

- The iron must be used and rested on a stable surface.

- Do not cover and allow the iron to cool completely before storing.

- The soleplate of the iron will become hot during use. Do not touch and always

carry by the handle.

- Do not use iron on, near or under flammable or heat sensitive items.

- Do not overfill.

- Do not leave iron unattended while it is connected to the mains supply.

- The iron should be used strictly in accordance with these instructions. No

liability can be accepted for any damage caused by non-compliance with these

instructions, or any other improper use or handling.

- Do not allow the cord to hang down over edges where it can be reached by children.

- Do not immerse the iron in water.

- Unplug the iron from the mains electrical supply before filling with water or

emptying the tank.

Using your Steam Iron

1. Remove the plastic protective cover from the sole plate of the iron and clean with a

soft cloth.

2. Select the ironing temperature for the item being pressed and align the

corresponding fabric type marked on the temperature control knob, with the arrow

marked on the housing (just in front of the knob).

3. If using steam, place the iron onto the sole plate and fill the water reservoir through

the filling aperture using the measuring beaker provided. Do not overfill or exceed

the MAX water level marked on the water reservoir.

4. Stand the iron in the upright position (resting on its heel).

5. Fully unwind the cable, plug in and switch on. The temperature indicator lamp will

illuminate to show that the iron is heating up.

6. When the indicator lamp goes out, means that the iron has reached the

selected temperature.

7. If using steam, turn the steam control knob to the setting in the table on the

following page.

8. The iron can be turned off any time by switching off at the mains and unplugging.