Cascade 20E Manuel d'instructions d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Cascade 20E. Cascade 20E 11 pages. Non-sideshifting & sideshifting clamps
Également pour Cascade 20E : Manuel d'instructions d'installation (14 pages)
Imprimer la pageC
ONTENTS
Recommended Hydraulic Supply
Truck Requirements
Installation
Periodic Maintenance
R
ECOMMENDED HYDRAULIC SUPPLY OPTIONS
E-Series Clamps can be operated with any of the hydraulic
supply arrangements shown below. Refer to Cascade Hose
& Cable Reel Selection Guide , Part No. 212199, to select the
correct hose reel for the mast and truck. The hose and fitting
requirements are:
• All hoses and fittings for CLAMP and SIDESHIFT functions
should be at least No. 6 with a minimum internal diameter
of 9/32 in. (7 mm).
A
i
This Manual provides instructions for installing Cascade
E-Series Non-sideshifting and Sideshifting Clamps. Follow
i
the suggested installation procedures for best results. If
you have any questions or need more information, contact
your nearest Cascade Service Department for assistance
(see back cover).
1
Read the WARNING Statements placed throughout this
Manual to emphasize safety during Clamp installation.
2
IMPORTANT: Field alterations may impair performance or
capability and could result in loss of warranty. Consult
Cascade for any required modifications.
8
Non-Sideshifting
A or B
RH or LH THINLINE™ 2-port hose reel group.
OR
C
Mast single internal hose reeving group.
Sideshifting
B
A and B
RH and LH THINLINE
OR
C
C
Mast double internal hose reeving group.
Sideshifting with Solenoid
A
6-N-1 cable/hose reel group.
OR
A and C
Cable reel and single internal hose reeving group.
GA0033.ill
™
2-port cable hose reel groups.