Airvent Mixflow ECIF200-MAX Manuel du propriétaire - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Airvent Mixflow ECIF200-MAX. Airvent Mixflow ECIF200-MAX 2 pages.

Imprimer la page

BEFORE STARTING

Upon receipt, please check carefully whether the product is consistent with your order, the fan should be inspected in

case of any damage. Ensure the product specifications and product tags correspond to the correct power and voltage

standards of the country the fan is being used in.

Non ROT

Version

ROT

Version

INSTALLATION

Warning: The fan must be isolated from the power supply during installation and maintenance.

① Remove the fan body from the spigots that are

attached to the base by releasing the two retaining

clamps.

③ Re-mount the fan body in-between the spigots

by lining up the retaining clamps.

Hoops

Main

Hoops

Impeller

Duct

Frame

Insert 1

Insert 2

Spigots

Base plate

② Mount the base in the desired position using the

fasteners supplied

④ Tighten the two retaining clamps ensuring the

body is tightly fastened.

WIRING Diagram

—ECIF40W-150 / ECIF50W-150

Duct

This is a plug & go product, no further wiring is required.

For build-in ROT Fans only

WARNING

Please ensure colour code is followed When Wiring，incorrect Wiring will result in damaged ROT PCB

Board and will void warranty.

• Airvent Australia Pty Ltd warrants this product to be free of defects in material and workmanship for the applications specified in

the Owner's Manual for a period of one year from date of purchase.

• This warranty only applies to the original purchaser of this product.

• This warranty excludes damage, accidental or otherwise, to the unit not caused by a defect in material or workmanship.

• The warranty also excludes damage caused by misuse, tampering modification, misassemble, repairs, or alteration or failure to

adequately maintain and care for the unit. Operating this product under any conditions other than those recommended or at

voltages other than indicated will also void this warranty. For warranty issues, contact the place of purchase for repair/replacement

opportunities. The original date receipt or proof of purchase must accompany all returns.

One

• All warranties expressed or implied are limited for one year from the date of purchase. Airvent is a register trademark of AIRVENT

Year

AUSTRALIA PTY LTD. Unless prescribed by law, AIRVENT shall not be liable for any personal injury, property or any incidental or

consequential damage of any kind resulting from malfunctions, defects, misuse, improper assembly or installation, or alteration of

this product.

• For further warranty clarification, please visit our website on www.airvent.com.au or email us on [email protected].

WIRING Diagram

—ECIF40W-150T / ECIF50W-150T

Wall Plug

SUPPORT & LIMITED ONE-YEAR WARRANTY