cascade corporation 55H Manuel d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} cascade corporation 55H. cascade corporation 55H 12 pages. Fork positioner
Imprimer la pageC
ONTENTS
Recommended Hydraulic Supply
Truck Requirements
Installation
Periodic Maintenance
R
ECOMMENDED HYDRAULIC SUPPLY OPTIONS
The 55H Fork Positioner requires one of the hydraulic
supply arrangements shown below. Refer to Cascade
Hose & Cable Reel Selection Guide, Part No. 212199, to
select the correct hose reel for the mast and truck. Hose
and fitting requirements are as follows:
• All hoses and fittings for fork-positioning and sideshift-
ing (if equipped) functions should be at least No. 4
with 3/16 in. (5 mm) minimum I.D.
B
i
This Manual provides instructions for installing the
Cascade 55H Sideshifting Fork Positioner.
i
Follow the suggested installation procedures for best
results. If you have any questions or need more informa-
tion, contact your nearest Cascade Service Department
(see back cover).
1
Read the WARNING Statements placed throughout this
Manual to emphasize safety during Fork Positioner
installation.
2
IMPORTANT: Field alterations may impair performance
or capability and could result in loss of warranty. Consult
Cascade for any required modifications.
8
Non-Sideshifting
A Mast Single Internal Reeving
C LH THINLINE
Sideshifting
A Mast Double Internal Reeving
A and C Mast Single Internal Reeving and
C
B and C RH and LH THINLINE
A
Solenoid Adaption
A and B Mast Single Internal Reeving and
B RH 6-N-1 Cable/Hose Reel Group
GA0033.ill
OR
2-Port Hose Reel Group
OR
LH THINLINE
2-Port Hose Reel
Group
OR
2-Port Hose
Reel Groups
RH Cable Reel Group
OR
6039153 Rev. 0