cascade corporation J Series Manuel de l'utilisateur - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} cascade corporation J Series. cascade corporation J Series 18 pages.

Imprimer la page
P
ERIODIC MAINTENANCE
Hook-Type Fork Positioner
Attachments
In addition to the previous page maintenance
schedule, where applicable, the following maintenance
procedures must be completed on hook-type fork
positioner attachments:
• 300 Hours – Apply general purpose chassis grease
to fork carrier bearings.
• 300 Hours – Tighten capscrews as follows:
Fork Position Cylinder Lug – 15 ft.-lbs. (20 Nm)
Fork Pad – 500 ft.-lbs. (678 Nm)
Fork Carrier – 28 ft.-lbs. (38 Nm)
NOTE: Apply Loctite 242 to Fork Position Cylinder
Lug and Fork Pad capscrews.
• 300 Hours – Apply general purpose chassis grease
or Slip-Plate (or a 'paint-on" graphite equivalent) to
the fork slider bars.
14
Fork Slider
Bars
Lower Fork
Carrier Bearings
Fork Pad Capscrews
Upper Fork
Carrier Bearings
Fork Position
Cylinder Lug
Capscrews
Fork Carrier
Capscrews
FP1212.eps
6082563-R2 EN