cascade corporation 10A Bin Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} cascade corporation 10A Bin. cascade corporation 10A Bin 16 pages. Dumper
Imprimer la page
I
NSTALLATION
Truck Requirements
WARNING: Rated Capacity of the truck/
attachment combination is a responsibility
of the original truck manufacturer and may
be less than that shown on the attachment
nameplate. Consult the truck nameplate.
Truck Relief Setting
2000 psi (140 bar) Recommended
2300 psi (160 bar) Maximum
Truck Flow Volume
Min.
➁
5 GPM
10A
(19 L/min.)
➀ Cascade Bin Dumpers are compatible with SAE 10W petroleum
base hydraulic fluid meeting Mil. Spec. MIL-0-5606 or MIL-0-
2104B. Use of synthetic or aqueous base hydraulic fluid is not
recommended. If fire resistant hydraulic fluid is required, special
seals must be used. Contact Cascade.
➁ Flow less than recommended will result in slower than normal
dumping speed.
➂ Flow greater than maximum can result in excessive heating,
reduced system performance and short hydraulic system life.
Maximum Fork Dimensions
Width (W) – 5.7 in. (145 mm)
Thickness (T) – 2.0 in. (50 mm)
Length (L) – 43.3 in. (1100 mm)
Auxiliary Valve Functions
Check for compliance with ANSI Standards:
8
➀
Recommended Max.
➂
7 GPM
10 GPM
(26 L/min.)
(38 L/min.)
W
L
GA0126.eps
GA0421.eps
T
Tilt Forward
Hoist Down
Dumper Forward
Hoist Up
Tilt Back
Dumper Back
6801202