Airvent FreeAir Manuel d'entretien et d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien et d'installation pour {nom_de_la_catégorie} Airvent FreeAir. Airvent FreeAir 4 pages. Active chilled beam

Imprimer la page

Active chilled beam

FreeAir

Maintenance and installation

guide.

Description

The FreeAir active chilled beam is a two-way induction type

air-conditioning unit that is designed for exposed installation,

mounted directly against the ceiling. It is suitable for ventila-

tion, cooling and heating. The primary air from the air han-

dling unit is injected through the specially shaped nozzles and

discharged into the room along the ceiling. Causing induction

of the room air to flow through the cooling and/or heating

coil, which then mixed with the primary air flows back into the

room through the linear slot openings on the two sides of the

beam. The conditioned/mixed air discharged along the ceiling

provides the optimal coanda effect which is always the objec-

tive when the occupied zone requires low air velocities.

Air duct connection: Ø100 mm

AirFlex- adjustable air deflectors

FreeAir is equipped with AirFlex air deflectors, which can be

manually and individually adjusted on each side of the air

slots, as a standard option. AirFlex allows the operator to easily

adjust the direction and throw distance of the discharged

conditioned air. With the fine-tuning capabilities of the AirFlex

deflectors, a highly flexible, pleasant and draft-free indoor

climate can be achieved.

AirFlex

- Less risk of draft

- Shorter throw length

- Individually adjustable

15-12-04

Materials

The duct and plenum air box are made of galvanized steel.

The visible front plate and side panels are powder coated

sheet steel painted in standard white RAL 9003 colour (or

in any other RAL colour requested by the customer). The

heat exchanger fins are made of aluminium, and the pipes

are made of copper. The AirFlex air deflectors are made of

polyamid plastic. Square or circular perforation as standard

options.

Airvent reserves the right to change specifications.

www.airvent.eu

Square or circular perforation as standard options

FreeAir