Addictive audio 5.2 Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Addictive audio 5.2. Addictive audio 5.2 13 pages. Stereo/mono bridgeable high power car amplifier

Imprimer la page

WIRING DIAGRAM

2 CHANNEL

LINE INPUT

GND REM B+

CROSSOVER ADJUSTMENTS

INPUT LEVEL ADJUSTMENT

To reach a maximum in dynamic response from each individual head-unit/amplifier/

speaker combination, it is important to set the respective input level controls "GAIN"

of all channel pairs correctly.

Before you start, you MUST set all tone controls (Bass, Mid, Treble, Loudness etc.)

and the fader on the head unit to their neutral or center positions.

Now turn all input gain controls of the installed amplifiers anti-clockwise to their minimum

positions and start with the channel pair, that drives the subwoofer system. The lowpass

level remote control if installed in your system configuration - should be set at a low position,

so there is enough headroom to turn up the bass volume later on.

LEVEL

x 1

MIN

MAX

FULL

H.P.F

2 CHANNEL CLASS AB AMPLIFIER

CAR STEREO HEAD UNIT

AUTO - ANTENNA LEAD

- 8 -

HIGH PASS FILTER

x 10

50Hz

500Hz

(500Hz)

(5kHz)

5.2

CH1

CH2